| 一般电力检查井模具都是在专业的预制厂家进行生产 |
| 添加时间：2022/1/6 15:59:14 浏览次数： |
| 一般电力检查井模具都是在专业的预制厂家进行生产，这样的预制生产不仅能模具生产过程中对细节的处理，还能使预制件能快速有效的生产出来，可以正常的投入工程上进行使用，另外就是模具得在脱模上需要注意，一般混凝土凝固的时间不是很确定的，影响凝固时间的因素有当天的温度湿度、泥浆的用量以及泥浆内的水分含量，所以一定要混凝土凝固的过程严格监控，凝固时间过长会出现脱模困难的情况，待泥浆固定成型后就可以将模具拆开了。 Generally, the moulds for electric inspection wells are produced by professional prefabrication manufacturers. Such prefabrication can not only deal with the details in the process of mould production, but also make the prefabricated parts quickly and effectively produced, which can be normally used in the project. In addition, attention should be paid to the demoulding of moulds. Generally, the setting time of concrete is not very certain, The factors that affect the setting time include the temperature and humidity of the day, the amount of slurry and the moisture content in the slurry. Therefore, the process of concrete setting must be strictly monitored. If the setting time is too long, it will be difficult to demould. After the slurry is fixed and formed, the mold can be disassembled |
| 上一页 盖板模具在安装过程上要首先要清理边坡, |
| 下一页 检查井模具现浇与预制的区别是按照具体施工要求进行的 |