| 检查井模具的成型加工工艺 |
| 添加时间：2019/8/8 9:25:04 浏览次数： |
| 检查井模具无渗漏系统和管网智能监测技术的研究,进一步完善有关设计规范、施工图集和产品标准体系。检查井模具加大产品研发力度,丰富产品种类和型号规格,降低成本,为产品推广提供技术支撑。 Research on the technology of non-leakage system of inspection well mould and intelligent monitoring of pipeline network will further improve the relevant design specifications, construction drawings and product standard system. The inspecting well mould strengthens the product research and development, enriches the product category and the model specification, reduces the cost, and provides the technical support for the product promotion. 检查井模具规格齐全,形成了完整的生产体系,能够满足市场上需求的绝大多数检查井及配件的规格型号。检查井模具生产的检查井采用一次成型加工工艺,抗低温,韧性好、内壁光滑,无剪切,井座中设置清晰的导流槽,使其有效防止水流对冲,避免水头损失,从而大大减少污物滞留,便于清通与维护。 Inspection wells have complete specifications, forming a complete production system, which can meet the needs of the market for most inspection wells and accessories specifications and models. Inspection wells produced by inspection wells mould adopt one-time forming process, which has low temperature resistance, good toughness, smooth inner wall, no shearing. Clear guide grooves are set in the wellbore seat to effectively prevent water flow collision and head loss, thus greatly reducing the retention of dirt and facilitating clearance and maintenance. 检查井模具生产的检查井井筒承口采用加强筋支撑,井筒承口内壁加强筋360°环形台阶分布,支管承口网状加强筋分布,使井座受到的垂直压力均匀分布,来自地表压力通过加强筋直接传输到基础,10吨压力相当于只受力2吨,大大减少了井座的破坏力,增加整体安全性,确保井体不变形。 In the production of inspection wellbore moulds, reinforcing bars are used to support the wellbore socket. The distribution of reinforcing bars in the inner wall of the wellbore socket is 360 degree circular step, and the distribution of reinforcing bars in the branch pipe socket is network. The vertical pressure on the wellbore is evenly distributed. The pressure from the surface is transmitted directly to the foundation through reinforcing bars. The pressure of 10 tons is equivalent to 2 tons of force, which greatly reduces The destructive force of the wellbore increases the overall safety and ensures that the wellbore does not deform. |
| 上一页 护坡模具在选择的时候最好注意以下几点: |
| 下一页 塑料模具的工作条件 |