| 模具使用注意事项 |
| 添加时间：2021/7/13 14:11:45 浏览次数： |
| 使用注意事项： Precautions for use: 因为这是一款钢模具，所以不管是在存放还是在生产的过程中都得在干燥的环境中进行，相反如果长期处在一个潮湿环境中就会导致模具出现生锈的情况，从而折损他的使用寿命，虽然电力检查井模具是可以进行维修的，但是修理是要产生一定费用的，并且修理的频率过高对模具的质量产生不利的影响，所以对模具的正规操作是非常重要的。 Because this is a steel mold, it has to be stored in a dry environment or in the process of production. On the contrary, if the mold is in a humid environment for a long time, it will rust and damage its service life. Although the mold of electric inspection well can be repaired, the repair will cost a certain amount of money, And the frequency of repair is too high to have a negative impact on the quality of the mold, so the regular operation of the mold is very important. 模具性能： Mold performance: 一般电力检查井模具都是在专业的预制厂家进行生产，这样的预制生产不仅能模具生产过程中对细节的处理，还能使预制件能快速有效的生产出来，可以正常的投入工程上进行使用，另外就是模具得在脱模上需要注意，一般混凝土凝固的时间不是很确定的，影响凝固时间的因素有当天的温度湿度、泥浆的用量以及泥浆内的水分含量，所以一定要混凝土凝固的过程严格监控，凝固时间过长会出现脱模困难的情况，待泥浆固定成型后就可以将模具拆开了。 Generally, the moulds for electric inspection wells are produced by professional prefabrication manufacturers. Such prefabrication can not only deal with the details in the process of mould production, but also make the prefabricated parts quickly and effectively produced, which can be normally used in the project. In addition, attention should be paid to the demoulding of moulds. Generally, the setting time of concrete is not very certain, The factors that affect the setting time include the temperature and humidity of the day, the amount of slurry and the moisture content in the slurry. Therefore, the process of concrete setting must be strictly monitored. If the setting time is too long, it will be difficult to demould. After the slurry is fixed and formed, the mold can be disassembled. |
| 上一页 护坡模具在选择的时候最好注意以下几点: |
| 下一页 检查井模具现浇与预制的区别是按照具体施工要求进行的 |