| 流水槽模具正常运转情况 |
| 添加时间：2020/11/24 13:27:16 浏览次数： |
| 流水槽模具长时间使用后必须磨刃口，研磨后刃口面必须进行退磁，不能带有磁性，否则易发生堵料。流水槽模具使用企业要做详细记载、统计其使用、护理及损坏情况，据此可发现哪些部件、组件已损坏，磨损程度大小，以提供发现和解决问题的信息资料，以及该流水槽模具的成型工艺参数、产品所用材料，以缩短流水槽模具的试用时间，提高生产效率。 The edge of the runner die must be grinded after a long time of use, and the edge surface must be demagnetized after grinding, which can not be magnetic, otherwise it is easy to block. The enterprise using the water trough mould should make detailed records and statistics of its use, care and damage, so as to find out which parts and components have been damaged and the degree of wear, so as to provide the information for finding and solving the problems, as well as the molding process parameters and product materials of the water trough mold, so as to shorten the trial period of the flume mold and improve the production efficiency. 流水槽模具正常运转情况下，测试流水槽模具各种性能，并将然后成型的塑件尺寸测量出来 Under the normal operation of the runner mold, test the performance of the runner mold, and then measure the size of the molded plastic parts |
| 上一页 六角护坡模具的发展前景 |
| 下一页 水泥检查井模具有较低的维护费用 |