新闻动态
模具零件裹面的组成
模具零件裹面的组成
Composition of coating surface of mold parts
组成模具的零件形状虽然各异,但构成每个零件的基本表面可概括为3种。
Although the shapes of the parts that make up the mold are different, the basic surfaces that make up each part can be summarized as three kinds.
(1)回转面零件的外圆面、内圆面、圆锥面等。
(1) Outer circular surface, inner circular surface, conical surface, etc. of revolving surface parts.
(2)平面板的表面和轴的端面等。
(2) The surface of the plane plate and the end face of the shaft, etc.
(3)曲面成形零件的二维曲面和三维曲面等。
(3) The two-dimensional surface and three-dimensional surface of surface forming parts.
模具零件成形的实质就是解决这3盖土网 防寒布 麻绳 油麻绳 麻刀 沥青麻绳 静压造型线 自动浇注机 铸铁拍门 钢制拍门 玻璃钢拍门种基本表面的加工问题。对于回转面和平面通常采用传统的切削加工就可以成形,根据零件表面不同的精度要求和不同的材质可以选取不同的加工方案。
The essence of mold part forming is to solve the processing problems of these three basic surfaces. The rotary surface and plane can be formed by traditional machining. Different machining schemes can be selected according to different accuracy requirements and different materials of the part surface

联系方式

  1. 名称:保定检查井钢模具厂
  2. 手机:13313028229
  3. 邮箱:xx
  4. 地址:xx

版权 © 保定检查井钢模具厂 网址:jianchajingm.75ix.cn  推荐:检查井钢模板,沟盖板模板,水泥护坡模板,箱变基础模具

网站建设及优化保定遨游网络公司